The Top 5 Plumbing Myths Debunked by Price Busters Plumbing

Price Busters Plumbing Myths

In an age where information is available at lightning speed, it’s easy to find a seemingly endless number of online DIY tips and tutorials. It seems like just about everyone has ideas for quick and easy home fixes that they hope might save a few bucks. However, as well all know, you can’t believe everything you read on the internet. In fact, in some situations, even the most well-intentioned guidance does more harm than good. The plumbing industry is certainly not immune to this — shall we say — unqualified advice. For that reason, we think it’s important to bust some of the main plumbing myths that are floating around in the world. At Price Busters Plumbing, we’re all about saving you time, money, and heartache!

1. Flushable Wipes

Plumbing Myths

You might be thinking, “Okay, so what about flushable wipes?” We hate to be the bearer of bad news but flushable wipes are the myth. While these products are generally seen as hygienically superior to run-of-the-mill toilet paper, there is one glaring problem: flushable wipes aren’t actually all that flushable. Generally, a wipe lacks the ability to effectively breakdown in your pipes. Over time, multiple wipes can build up and clog the plumbing system. We’d say that the flushable wipe is currently one of the biggest plumbing myths.

2. Drop-In Tank Tablets Are Good for a Clean Toilet

Plumbing Myths

Sure, it may seem like a pretty decent deal — you pay a mere couple of bucks for some cleaning tablets, you drop one in your toilet tank, and you get to enjoy a clean bowl for weeks with minimal effort. Well, when you think about what that tablet may be doing to the inner workings of your toilet, it’s a pretty terrible deal. You see, these “old-school” cleaners can be very corrosive to essential parts of the system. It’s actually such a major problem that some toilet manufacturers will not honor a warranty if damage from an in-tank cleaner is evident. It’s important to recognize that plumbing myths sometimes come in the form of cleaning product advertisements.

3. You Can Pour Grease Down the Drain if It’s With Hot Water

There are tons of articles that will tell you what shouldn’t be put in drains. Make sure to be leery of content that claims certain tricks will allow you to circumvent paying attention what you put down your pipes. For example, one suggestion is that it’s okay to flush grease down the sink with hot water. The misconception is that the high temperature will “melt” the grease, allowing it to flow easily through the system. The problem is that, although the grease may be moving down the drain, it’ll solidify in the pipes and become a collector of clog-worthy material. The best way to avoid this is to never put grease in your sink. If it’s unavoidable, try to rinse it with cold water.

4. Displacing Water in the Toilet Tank Will Save You Money

Price Busters Plumbing Myths

One of the oldest plumbing myths out there is the old brick in the toilet scheme. The assumption is that, when some of the water in the toilet tank is displaced, less water will be utilized per flush. The ultimate goal is water conservation and reduced utility bills. Of course, we understand the appeal here; however, a brick can cause significant damage to your toilet. A brick can start to crumble and ruin the flushing mechanism. It’s also worth noting that some toilet models just require a certain amount of water to run properly.

5. A Loud, Roaring Water Heater Needs to Be Replaced

Plumbing Myths

A water heater that’s making some noise can be a scary thing. It’s no wonder since a malfunctioning system carries fire and explosion risks with it. It’s easy to believe the plumbing myths that say it’s time for new equipment. But, noise doesn’t always mean the device is at the end of its life. In many cases, it’s just in need of some simple cleaning or servicing. Water heaters require a decent amount of regular maintenance; if this isn’t done, it can cause various issues and unpleasant noises. It’s a great idea for you or a professional to closely inspect your water heater before shopping for a new one.  

If you ever have doubts about the health and efficiency of your plumbing system, Price Busters Plumbing can help. We are trusted Seattle plumbers with a reputation for honesty, dependability, affordability, and superior customer service. Whatever your plumbing project entails — water heaters, drains, fixtures, sewer lines, pipes, or bathroom remodels — we have motivated and qualified technicians ready and willing to give it their full attention.

Don’t be fooled by plumbing myths! Check our blog for expert tips or contact us to schedule a service appointment! 

Price Busters’ DIY Plumbing Tips

We care about your plumbing! And, we’re not just talking about the big jobs that require a professional’s help. On the contrary, we’re truly concerned with the whole health of your pipes, drains, and fixtures (whether it involves us or not). In many cases, a problem or disaster is completely preventable; all it takes is regularly performing some simple maintenance tasks. As a trusted Seattle plumbing company, we’re never above providing people with the tools they need to keep a plumbing system running as smoothly as possible. As such, we’ve compiled some tried-and-true DIY plumbing tips that are quick and easy.

Check Your Shower Head

It’s a good idea to keep an eye on your shower head to ensure it is operating properly. It’s not unusual for mineral deposits to build up and cause congestion. On the other hand, if parts are worn out, you may have to deal with a constant leak of water. Fortunately, both issues are a cinch to fix:

Shower Head Congestion

At Price Busters, we obviously have access to the latest technology; however, there are some issues that don’t take any real technology at all. If your shower head is congested, turn the water off, place the head in a bowl filled with a warm water and vinegar mixture, and leave it for an hour. After the hour, use a small brush to loosen deposits.

Shower Head Leak

A leak is possibly a threading problem. But, that doesn’t mean there is a lack of DIY plumbing tips to handle it. A good way to deal with a leak is to use thread seal tape. Simply unscrew the shower head and wrap tape around the shower arm thread (in a clockwise direction, two to four times). Once the shower head is reattached, your leak should hopefully be fixed

Deal With a Clogged Drain

The easiest way to prevent a clog is to utilize strainers on every drain. Then, you can routinely clean the strainers and remove debris. But, sometimes clogging is just inevitable. There are a couple of ways to attack the problem:

Water/Vinegar/Baking Soda Combination

You have to love DIY plumbing tips that require run-of-the-mill kitchen ingredients! There are multiple steps with this method, but it’s still pretty painless:

  1. Pour a pot of hot water down the drain
  2. Pour in a half cup of baking soda
  3. Pour in a combination of one cup of hot water and one cup of vinegar
  4. Cover the drain with a plug and wait until it stops fizzing (or up to 10 minutes)
  5. Once more, pour a pot of hot water down the drain

Snake Tool

You should be able to rent or purchase a snaking tool from your local hardware store. Slowly slide the tool into the drain and let it go down as far as possible. Once you feel you’ve reached a clog, twist the snake and pull out the debris. Easy peasy.

Take Care of Your Garbage Disposal

DIY plumbing tips

*image from handyman tips

Old, pungent food can make for a smelly, unpleasant garbage disposal. Nobody wants the aroma of rotting material to permeate an area where they eat. Maintaining your garbage disposal doesn’t take harsh chemicals or major tools. Every one of these DIY plumbing tips is safe and straightforward:

  • For a fresh scent, toss citrus rinds (lemon, orange, lime) into the disposal and run water as the disposal is on
  • To reach the upper parts of the disposal, plug the disposal drain, squirt a decent amount of dish soap in, fill the sink up halfway with hot water, unplug and run the disposal as the water/soap mixture drains
  • To clean the blades, throw a few ice cubes and run the disposal for up to 2 minutes

Eradicate Well Water Stains

Many people still use well water in their homes because it’s cheaper than other sources. Unfortunately, there are some problems that are unique to groundwater. It is not atypical for well water to cause stains on bathtubs, sinks, toilets, and even clothes. This is often the result of bacteria or mineral buildup.

If you’re using well water and you notice pink and/or orange stains, this likely means the iron levels are too high. While it’s true that you can try various cleaning sprays to remove stains, it’s really not a solution to the main problem. The best way to fix this — buy a water softener that uses ion exchange to remove minerals. As this is a bit more complicated than other DIY plumbing tips, its perfectly acceptable call in some help. The technicians at Price Busters are happy to assist with well system needs.

We hope you’ve found this list useful! Our goal is to bring as much value to our clients as possible. For that reason, we often share strategies for maintaining plumbing systems. But, don’t forget — we are highly-trained Seattle plumbers available for hire! We offer a wide range of services and abide by a philosophy of honesty, efficiency, and complete customer satisfaction. Our rates are reasonable and, in many situations, we can complete a job within the same day!

When DIY plumbing tips don’t do the trick, you need an affordable and trustworthy plumber. Connect with Price Busters to chat or schedule an appointment!

Looking For Water Heater Repair in Seattle? You Know Who to Call

Water heaters play a big role in our daily lives. But, It’s not unusual for people to just forget it exists; that is, until it needs repair or replacement. In this case, it becomes the only thing that matters and for good reason – not many people enjoy a freezing cold shower! Undoubtedly, you’re here because you have an issue, and you’re looking for a Seattle plumbing company that knows the ins and outs of water heater installation in your area. You’ve come to the right place. This is a Price Busters Plumbing specialty! Of course, we’re sure you want to know why you should go with pros for installation and service. No problem. We’ll break it down for you.

Safety Hazards

Water Heater Repair Seattle

Safety is arguably the biggest reason to have a professional to deal with your water heater. There are several aspects of a system that, if dealt with improperly, can cause damage, serious injury, or even death:

  • Incorrectly installed and leaky water heaters may result in mold growth.
  • A thermostat setting that’s high (over 125 degrees) increases the risk of scalding burns.
  • A thermostat setting that’s low (under 115 degrees) increases the risk of bacteria growth.
  • Faulty ignition sources (either a flame or electric heating element) are fire hazards.
  • A gas unit with a gas line leak is a fire and explosion risk.
  • Vent and flue issues may create a buildup of carbon monoxide.
  • An improperly installed Temperature and Pressure Relief Valve (TPR) increases the risk of pressure buildup and explosion.

All of these are good reasons to trust a pro with your water heater installation.

The Regulations Related to Water Heater Installation in Seattle

Seattle Water Heater Repair

Installing a water heater goes well beyond purchasing the unit and connecting it to the home. Rules recently enacted by the U.S. Department of Energy dictate the efficiency standards of all water heaters including electric, gas, propane, and oil.

According to the DOE, “The standard will avoid about 172.5 million metric tons of carbon dioxide emissions, equivalent to the annual greenhouse gas emissions of about 33.8 million automobiles.”

Standard-sized tanks (50 to 55 gallons) now include extra insulation which can bring them up to two inches or more in diameter. While that’s not a crazy amount, it can be hard on those people who have little to no clearance space to work with. Additionally, units that are more than 55 gallons are not only larger, but also incorporate new condensing technology. In any situation, a new tank may require a homeowner to adjust venting or even relocate the entire system.

At Price Busters Plumbing, we can help you navigate water heater installation in Seattle. We are well versed in government regulations and can ensure that the whole process is painlessly smooth and that your home or business is up to code.

Continued Maintenance and Repair

Water Heater Installation and Repair

This is often where many homeowners fall short (which is sad since just a little bit of TLC can save a lot of money). Water heaters must receive maintenance on a routine basis. In addition to extending the life of the unit, regular servicing ensures that safety parts and features are functioning properly. The typical service appointment includes a series of quick and painless actions:

  • Inspecting the thermostats
  • Examining the temperature and pressure valves
  • Clearing out dust and debris
  • Surveying the water pipes leading to the unit
  • Flushing the system

After your Seattle water heater installation, be sure to check the accompanying owner’s manual. This will tell you how often you should maintain your unit. However, if it’s not available, try to abide by a general schedule of once per year. It’s also worth noting that systems located in areas with harder water may need to be flushed more frequently.

There’s plenty to consider with a water heater, so it’s understandable if you feel you don’t have the time or patience to deal with it! Fortunately, leaving the job to a professional company like Price Busters takes the stress and heartache out of the process. And, as an added bonus, when you work with our top-notch plumbers, we include a one-year warranty on our all parts and labor.

Get in touch with us — we can give you peace of mind when it comes to water heater installation in Seattle!